| Customization: | Available |
|---|---|
| Sensing Method: | Electric |
| Application: | Access Control System |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The flat-wing gate integrates mechanical, electronic, microprocessor control, and various identity recognition technologies organically. It facilitates the use of IC cards, ID cards, barcode cards, ID cards, fingerprints, and ticketing machines for scenic areas. By selecting various identity recognition system devices and adopting reliable safety protection devices, alarm systems, and directional indicators, it coordinates to achieve intelligent control and management of passages.
Flat wing gate is divided into: single core and double core; Single core: for single channel and multi-channel; Double core: for multi-channel.
I. Technical parameters
Case size: 1400 long *330 wide *1000 high (MM)
Shape material: the main body is made of 304# stainless steel, the overall plate thickness 2.0+1.5mm above
Main control circuit: A9 main control board based on linux embedded system, communication mode 485;
Control mechanism: the whole electric mechanism is mechanically driven based on bearing control/control circuit based on ARM technology to develop the turnstile can be programmed online, the turnstile firmware can be upgraded to meet future requirements.
Channel indication: LED channel indication; real voice prompt function is supported
Extension arm length: 275mm
Maximum channel width: 600mm
Weight: 85KG
Case material: domestic standard (No.304) stainless steel
Door color: red, blue, transparent, gray optional
Input interface: relay switch signal or 12V level signal or 12V pulse signal with pulse width>100ms, drive current>10mA
Normal service life: 3 million times
LED indicator: red and green indicator, channel status indicator
Card reading window: 2 (can be increased according to requirements)
Speed: 50 people/min (always open), 25-30 people/min (always closed)
Gate open and close time: 1 second
Time required to enter the passage state after power on: 3 seconds
Automatic reset time after failure: 10 seconds
Ii. Main functions and features
Fault self-test and voice prompt function, convenient for users to maintain and use;
Brushless engine, gear transmission, more stable operation, longer life;
The operating status of the programmable device can be changed through the built-in small panel on the main control board;
The mechanical structure and the double anti-clamp function are used to automatically stop or stop the motor within the default time when the telescopic arm is blocked in the process of resetting, and reset again after default delay (until reset), and the force is very small (≤2Kg);
Sound and light alarm function: including illegal intrusion, tailing alarm;
With voice prompt, the entrance and exit voice can be set;
The anti-collision function, when no gate opening signal is received, the wing door is automatically locked;
Extension arm synchronization function;
It has the automatic reset function. After opening the gate, if no passage is made within the specified time, the system will automatically cancel the user's permission for this passage. The standard is 5 seconds after opening;
The channel is automatically opened after power failure and closed automatically when powered on; the motor noise is small
Can be connected with a variety of card reading devices to receive relay switch signals;
Single or double control of personnel in and out;
Remote control and management can be realized directly through the management computer;
| Product technical parameters | |
| structure | Frame structure / 304 stainless steel shell |
| Turnstile composition | Motor, housing, gate control board, power supply, photoelectric panel |
| Case material | Domestic standard 304 stainless steel, 2.0+1.5MM thick stainless steel |
| Process standards | Laser cutting process, beautiful appearance |
| working voltage | AC220±10%V 50±10%HZ |
| Drive motor | DC brushless motor |
| outline dimension | 1400mm (length) * 330mm (width) * 1000mm (height) |
| Channel width | Channel width: 600mm |
| Height of the wing door | customizable |
| Transmission motor core | Fully automatic brushless transmission core, fault-free operation times> 5 million |
| Main control section | It adopts industrial-grade 32-bit ARM chip, which is industry-leading, fast reflection and strong processing ability |
| Door opening direction | One-way or two-way |
| Time of gate opening and closing | 1-2 seconds |
| Door opening and closing speed | Level 10 adjustable |
| Speed of passage | 40 / min (always on), 25-30 / min (always off) |
| The time required to enter the passage state after power on | Three seconds |
| Automatic reset time after failure | 1-3 seconds |
| Power off and open the door | The supercapacitor opens automatically |
| Gate machine motherboard self-test | support |
| logical decision | Precise anti-tail following, judging whether there are people in the channel, alarm when the time exceeds, and closing the gate to pass through, so as to meet more customer needs |
| Switching gate | Multi-stage deceleration function, running more stable and quiet |
| The power is automatically opened when it drops | Automatically open |
| Infrared monitoring | 6 infrared eyes for all-round detection |
| operating temperature range | -10°C ~60°C |
| work environment | Indoor and outdoor (shelter) -10ºC~70ºC Relative humidity: less than 90%, no condensation |
| relative humidity | 5~90%RH (no condensation) |
| noise | ≤55dB |
| levels of protection | IP45 |
| communication interface | Standard RS485 interface, distance less than or equal to 1200 meters |
| Status indicator light | LED traffic light status indicator |
| Input interface | Relay switch signal or 12V level signal or 12V pulse signal with pulse width>100ms, drive current>10mA |
Shenzhen Dongwo Intelligent Technology Co., Ltd. focuses on production Tripod turnstile,Speed Gate,Flap Barrier Gate,FULL Height Trunstile,Swing Barrier Gate,Sliding Barrier Turnstile,bar-rier gate,carparking system,face recognition,ESD Anti-static System,AB anti-tailgating turn-stile,Ticket-checking turnstiles in scenic areas,access control system,Advertising barrier gate,Fence barrier gate,Parking License Plate Recognition System,Campus Access Control Turnstile.Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction.
Wooden box material: High-quality wood that meets international transportation standards, such as plywood or solid wood that has undergone fumigation treatment, is selected to ensure that the wood is free from insect damage and decay, and has sufficient strength and stability. The thickness of the wood is determined by the weight and size of the equipment. Generally, the thickness of the side panels is 12-18mm, and that of the bottom panel is 18-25mm.
Internal protection: The interior is made of shock-absorbing materials such as EPE pearl cotton and bubble wrap to reduce the impact of vibration and collision during transportation on the equipment.
1.How do you ensure the quality of your products/quality control?
Our products have ISO9001and CE certificates, and all the detailed information can be found on our website.We promise to provide customers with the best product quality.
2.Do you provide OEM services?
Yes, we can provide the following OEM services:
(1)We can customize the barrier gates according to your needs.
(2)We can print your logo on the products and customize the retail box packaging and other things you need.
3.How long is the delivery cycle?
Delivery time for 1-50 sets: 5 working days; for 50-100 sets: 7 working days; for 100-500 sets: 15 working days. If customized packaging or logo is required, an additional 3-10 working days are needed.
4.Can I order samples?
A: Yes, we welcome sample orders for testing and checking the quality.
5.Do you provide OEM services?
A: Yes, we can design things according to your requirements.
6.How do we ensure the quality?
There are always pre-production samples before mass production;There is always a final inspection before shipment;
7.What can you buy from us?
Tripod turnstile, Speed Gate,Flap Barrier Gate,FULLHeight Trunstile,Swing Barrier Gate,Sliding Barrier Turnstile, barrier gate, carparking system, face recognition, ESDAnti-static System, AB anti-tailgating turnstile, Ticket-checking turnstiles in scenic areas, access control system, Advertising barrier gate, Fence barrier gate,Parking License Plate Recognition System, Campus Access Control Turnstile
8.Why should you buy from us instead of from other suppliers?
We are a factory-type company with independent research and development capabilities, possessing multiple invention patents. We have been serving domestic and foreign customers for more than 10 years, and we have a complete after-sales service system. Our product strength far exceeds that of many of our peers.
9.What services can we provide?
Accepted delivery terms:FOB,CIF,EXW, express delivery;Accepted payment currencies: US dollars, Chinese yuan;Accepted payment methods:T/T,L/C,Western Union,D/P,D/A,MoneyGram;Spoken languages: English, Chinese
10.What is your after-sales service?
All your inquiries can be replied to within 24 hours.Our company is equipped with excellent engineers and sales staff. We can provide you with the highest quality products and the most favorable prices.Our experienced engineers can guide you on how to use our products. Feel free to call our after-sales team.
){kind=link}